Vimberg Tonda Loudspeaker
The Tonda is Vimberg’s flagship floor-standing loudspeaker designed and manufactured in Germany. It’s a high-end speaker known for its purity, clarity, and finesse. It features a 3-way speaker system with a 30mm ceramic tweeter, a 90mm Accuton ceramic midrange woofer, and three 190mm Accuton woofers with 3D-shaped honeycomb sandwich diaphragms.
Category Loudspeakers
Country Germany
Manufacturer Vimberg
The Tonda is Vimberg’s flagship floor-standing loudspeaker designed and manufactured in Germany. It’s a high-end speaker known for its purity, clarity, and finesse. It features a 3-way speaker system with a 30mm ceramic tweeter, a 90mm Accuton ceramic midrange woofer, and three 190mm Accuton woofers with 3D-shaped honeycomb sandwich diaphragms.
Category Loudspeakers
Country Germany
Manufacturer Vimberg
The Tonda is Vimberg’s flagship floor-standing loudspeaker designed and manufactured in Germany. It’s a high-end speaker known for its purity, clarity, and finesse. It features a 3-way speaker system with a 30mm ceramic tweeter, a 90mm Accuton ceramic midrange woofer, and three 190mm Accuton woofers with 3D-shaped honeycomb sandwich diaphragms.
Category Loudspeakers
Country Germany
Manufacturer Vimberg
-
Free Delivery within Mainland UK.
60-Day Money-back Guarantee
Returns Policy
-
3-way fullrange loudspeaker
VIMBERG™ MRD-cabinet made out of waterproof high-density fiberlaminate and reinforcing aluminum elements for all drivers
1 x 30 mm Accuton™ Cell ceramic tweeter
1 x 168 mm Accuton™ Cell ceramic midrange woofer
3 x 190 mm Accuton™ Cell woofer, long excursion design with 3D shaped honeycomb sandwich diaphragm
optional: 30mm Accuton™ Cell diamond tweeter (Tonda D), also upgradeable anytime later
highend Mogami™ speaker cable wiring inside, Argento™ pure silver binding posts
highend crossover with VIMBERG™ monopulse technology: linear frequency response with optimized impulse response
exclusive use of Mundorf™ & Duelund™ components
dual-Tune bassreflex port design for lowest port noise and selectable F3
decoupling height adjustable isolation gliders and 3D-shaped installation triggers for optimized setup and placement to every floor
nominal impedance: 4 ohm (lowest point: 3.4 ohm at 100Hz)
efficiency at 2.83V/1m/1KHz: 90dB
exclusive VIMBERG™ real piano lacquer: summit white or jet black
exclusive VIMBERG™ VELVETEC: Summit White, Jet Black, Slate Grey, Sonoma Orange, Amethyst and other colours on request
weight without packaging: 2 x 96 Kg (2 x 212 lbs.)
weight with packagaing: 2 x 110 Kg (2 x 243 lbs.)
weight with optional ATA-flightcase: 2 x 142 Kg (2 x 313 lbs.)
shipment dimensions: W 40 cm x L 170 cm x H 64 cm
Vimberg Tonda Three-Way Flagship Loudspeaker
The Vimberg Tonda is the flagship model in the Vimberg range. It is a floor-standing loudspeaker that stands almost 1.5 meters tall and weighs 212 pounds per speaker. The default finish is high gloss lacquer black or white. Velvetec finishes in black, white, or other colours are available upon request, but lead times may vary.
The Tonda is equipped with three 190mm Accuton bass drivers, a 90mm Accuton ceramic midrange woofer, and a 30mm ceramic or diamond tweeter. The tweeter is made with Dueland & Mundorf components, and the crossover is designed specifically for the Tonda. The Tonda is also equipped with massive feet that are milled out of a single block of aluminium. These feet are connected to a 5-part isolation device with a Teflon-glider inlay, which provides the best possible isolation and height adjustment for different types of flooring.
The Tonda has been praised for its purity, clarity, finesse, and bass extension. It is renowned for its seamless transition between frequencies, linear frequency response, and incredible timing.
Additional technical details about the Vimberg Tonda:
Frequency response: 35Hz - 40kHz
Sensitivity: 89dB/W/m
Impedance: 4 ohms
Crossover frequency: 2.5kHz, 4kHz
Dimensions (HxWxD): 1500 x 300 x 370mm
Weight: 212 pounds
